uds1100-iap industrial device server in minutes, securely connect factory floor devices to enterprise systems access, monitor and control equipment over ethernet replace dedicated pcs and/or modem lines with fast and reliable ethernet networking supports rs-232, rs-422 and rs-485 communications includes modbus tcp, ascii, rtu and df1 protocols 15kv serial esd protection wide -40 70 c operating temperature range environmentally-friendly rohs and weee-compliant standards based communications using an open ethernet architecture as a standard provides the flexibility for equipment to communicate to virtually any type of industrial device. when used in conjunction with an opc server, most windows ? based hmi, scada and pc-based control applications have full access to information in the industrial equipment networked by the uds1100-iap. extending communications across the globe our approach to network-enabling devices is transparent to your attached equipment and software so you wont need to change the way you work. using a method called serial tunneling, the uds1100-iap encapsulates serial data into packets and transports it over ethernet. serial tunneling can be done in multiple ways: ? using lantronix supplied com port redirector ? software, windows device applications not designed for network communications are re-directed to communicate to devices connected to the uds1100-iap. ? connecting two uds1100-iap device servers configured to automatically talk to each other over the network creates virtual serial connections that can extend serial communications across a facility or around the world. built-in web server the built-in web server enables users to access and configure the uds1100-iap from a standard web browser. web pages enabling the uds1100-iap to be customized for unique applications can be built using lantronix development tools. on-board flash memory provides room for future system software upgrades and maintenance-free, nonvolatile web page storage. easy to set up and use the uds1100-iap can be set up locally through its serial port, or remotely using telnet or a web browser. the included deviceinstaller ? windows-based configuration software simplifies setup and provides an easy way to: ? assign ip & other network specific addresses ? load custom web pages ? enable web-based configuration of the device server ? ping or query the attached device(s) over the network ? view specific device data files ? upgrade firmware ? simplify process of installing industrial protocols complete with an auto mdi/mdix ethernet interface, the uds1100-iap is a powerful device communication solution thats perfect for your most demanding industrial applications. modem replacement in modem emulation mode, the uds is used to replace dial- up modems. the unit accepts modem at commands on the serial port. it then establishes a network connection to the end device, leveraging network connections and bandwidth to eliminate dedicated modems and phone lines. rohs-compliant, the uds1100-iap meets directive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment. if youre looking for a transparent, cost-effective, and scalable means to network-enable your industrial automation equipment, look no further than the uds1100-iap. the uds1100-iap is a rugged and powerful tool which enables users to connect, manage and control just about any piece of industrial equipment from virtually anywhere over ethernet or the internet. this single-port device server is a quick, simple and inexpensive way to bring the advantages of real-time or on-demand information access. remotely monitor, manage and control industrial equipment over the net industrial device server? uds1100-iap
15353 barranca parkway | irvine | ca 92618 | usa | tel: 800.422.7055 | fax: 949.450.7232 | www.lantronix.com ?2006, lantronix, inc. lantronix is a registered trademark, and device server, deviceinstaller and com port redirector are trad emarks of lantronix, inc. all other trademarks are the property of their respective owners. specifications subject to change without notice. all rights reserved. 910-502 09/06 dgs2500 industrial device server? uds1100-iap features and specifications serial interface interface: software-selectable rs232, rs422 or rs485 (2 and 4 wire support) connectors: 1 db25f dce serial port data rates: software-selectable baud rate from 300 to 230 kbaud characters: 7 or 8 data bits parity: odd, even, none stop bits: 1 or 2 control signals: cts/rts (hardware) flow control: xon/xoff (software) network interface interface: 10base-t/100base-tx ethernet port software selectable ethernet speed 10/100/auto software selectable half/full/auto duplex connector: rj45 standards: arp,udp,tcp, icmp,telnet,tftp, autoip,dhcp,http, snmp,tcp,udp, and telnet,tftp indicators (led) power, 10/100 link/activity (green) , 100/100 link/activity (green) , diagnostics (red) , status (green) processor cpu: lantronix dstni-ex 48 mhz clock memory: 256 kb zero wait state sram, 2 mb flash management lantronix deviceinstaller gui, serial login,snmp, telnet login,http power 9-30 vdc or 9-24 vac on barrel connector (1.5 watts maximum consumption) 9-30 vdc on db25f serial interface 3.3vdc on serial interface environmental operating: -40 to 70 c (41 to 158 f) storage: -40 to 85 c (-40 to 185 f) packaging material: metal enclosure with integrated wall mounts; optional 35 mm din-rail mount available dimensions (lxwxh): 9.0 x 6.4 x 2.3 cm (3.5 x 2.5 x 0.9 in) weight: 0.20 kg (0.45 lb) ip rating: 30 agency approvals ul, csa, fcc, ce,tuv, ctick,vcci warranty 2-year limited warranty shipping dimensions dimensions (lxwxh): 242 x 191 x 115 mm (9.5 x 7.5 x 4.5 in) weight: 1.5 kg (3.0 lbs) included software windows?98/me/nt/2000/xp-based deviceinstaller configuration software, com port redirector software and related utilities ordering information part number description UD1100IA2-01 uds1100-iap device server, 100-240 vac international power supply with regional adapters, includes 500-163 cable and acdin1001-01 din rail mount accessories 500-163 db25m to db9f serial cable (included) acdin1001-01 optional din-rail mount (included) 500-171-r db25m to rs485 and power input screw terminal adapter (order separately) uds1100-iap example configurations ethernet uds1100-iap device servers serial tunneling configuration programmable logic controller (plc) personal computer (pc) ethernet personal computer (pc) uds1100-iap device server programmable logic controller (plc) direct tcp/ip or redirector configuration b a emissions fcc part 15 subpart b class a radiated emissions 30mhz ?1000mhz ices-003 issue 4 february 2004 class a radiated emissions 30mhz ?1000mhz as/nzs cispr 22: 2004 class a radiated emissions 30mhz ?1000mhz en55022: 1998 + a1: 2000 + a2: 2003 class a radiated emissions 30mhz ?1000mhz vcci v-3/2005.04 class a radiated emissions 30mhz ?1000mhz en61000-3-2: 2000 class a harmonic current emissions en61000-3-3: 1995 + a1: 2001 fluctuations and flicker immunity en55024: 1998 +a1: 2001 +a2: 2003 iec_61000-4-2: 1995 esd 8kv air discharge (direct), 4kv contact discharge (direct/indirect) iec_61000-4-3: 1995 radiated immunity 3.0v/m, 1khz am sine wave at 80% iec_61000-4-4: 1995 eft/burst 1.0kv power lines, 0.5kv i/o lines iec_61000-4-5: 1995 surge immunity 1.0kv common mode, 1.0 kv differential mode iec_61000-4-6: 1996 conducted immunity 3.0 vrms, 80% am modulated (1khz) iec_61000-4-8: 1993 magnetic field immunity 50hz 1.0 arms/m iec_61000-4-11: 1994 voltage dips and interrupts (>95%,0.5 periods), (30%,25 periods), (>95%,250 periods) isolation designed with protection against transients and esd for use under harsh environments. serial port: 15 kv esd protection on rs232 and rs422/485 transceivers power input: up to non-repeated 600 w 10/100 usec pulse protection against transient over voltages ethernet port: 1500 vac isolation shielded with shield connected to chassis ground for signal integrity and esd protection
|
